-1 Excessive distortion of element number 55384 of instance P2CULAYER-1***WARNING: Mechanical penalty contact between surfaces ASSEMBLY_M_SURF-1 and ASSEMBLY_S_SURF-1 is causing a 72.434%
The surface assembly_surf-waterjiechu has not been locatedThe surface assembly_surf-boxjiechu has not been locatedAnalysis Input File Processor exited with an error.向您請教是哪個環節出了錯，如何修改？謝謝！
BOTTOMError in job bcs-1: NODE SET ASSEMBLY_BOTTOM HAS NOT BEEN DEFINEDError in job bcs-1: NODE SET ASSEMBLY_TOP HAS NOT BEEN DEFINEDError in job bcs-1: NODE SET ASSEMBLY_TOP HAS NOT BEEN DEFINED
*Elset, elset=Set-1, instance=Part-1-1 1, 2, 5, 6*Elset, elset=_Surf-1_S4, internal, instance=Part-1-1, generate 2, 8, 2*Surface, type=ELEMENT, name=Surf-1_Surf-1_S4, S4*End Assembly
The contact pair referencing surfaces assembly_m_surf-1 and assembly_s_surf-1 has at least one instance of a node belonging to both surfaces.
ABAQUS數據檢查時出現錯誤：主從截面共節點問題The slave surface assembly_s_surf-69 has 1780 nodes in common with its master surface assembly_m_surf-63.是什么原因呀？
模型：200m長的導線，有預張力，兩端固支，在據左端3m處加向上的30kN沖擊荷載（加載0.2ms卸載1.5ms）的斜坡荷載，單元長度0.2m。1.采用link167單元（離散梁單元）加載0.2ms卸載1.5ms時，能量不守恒，內能異常增大，但是將加卸載時間延長到0.1s就不會出現內能異常增大的問題。
The elements have been identified in element set WarnElemAspectRatio.1 elements are curved/warped. The angle subtended between the average element normal and a nodal normal exceeds 10 degrees.
The *tie pair (assembly_surf-26-ouhemian,assembly_surf-19) is also used as *contact pair. Remove this *contact pair.
具體顯示為： Error in job trial-simplified: SURFACE ASSEMBLY__T0_eularian part-1_M SPECIFIED ON THE *TIE OPTION CONTAINS EULERIAN NODES. NODES ON EULERIAN ELEMENTS CAN NOT BE TIED.
This node set is not active in the model Node set assembly__pickedset506 has not been defined Analysis Input File Processor exited with an error - Please see the Job-2.dat file
372 跳至頁
工程師必備
- 項目客服
- 培訓客服
- 平臺客服
TOP
